Check category
Industrial Control Products
Application of IPC-PUS Pumping Unit Intelligent Control Cabinet in Huoshaoshan Oilfield, Xinjiang
This paper mainly presents the application of IPC PUS to Beam Pumper of HuoShaoShan,The core controller of IPC-PUS series control system use pumping unit dedicated control program and digital feedback technology and it can automatically run by setting in advance. The whole system has a bypass function ,its control scheme reliable performance and simple operation and high efficiency for energy- saving.Taking HuoShaoShan oil field as an example,this paper analyzes its application and provides IPC-PUS series control system in the pumping unit system optimal application promotion scheme.
Application of PSG energy feedback device in mine hoist
Most of the coal mine hoists use a resistor in the stator coil of the motor to achieve the effect of speed regulation. During operation, part of the energy is released to the resistor by releasing electrical energy, thereby reducing the speed of the motor, which is bound to cause some electrical energy. Loss and waste. In addition, the resistance heating increases the indoor temperature. As the motor runs for a long time, the motor shell becomes severely heated and needs to be shut down for cooling, which greatly reduces the life of the motor and also affects the production efficiency. The society is progressing and technology is developing. This confusion has aroused the attention of equipment users. The installation of energy feedback has been widely used. Of course, energy feedback should replace the backward control method of resistance heating.
Application of PSG feedback unit on dynamometer
The dynamometer is also called the motor type test system in the motor testing industry, which mainly tests the load characteristics of the motor. The dynamometer is a load machine that applies a variable torque load to the motor under test and absorbs its power. Equipped with a display control system, it can test various types of motors (such as: single three-phase asynchronous motors, synchronous motors, DC motors, series The input voltage, current, power and output torque, speed, power and characteristic curve of excitation motor, power tool, wheel hub motor, starter motor, automobile motor, etc.). According to the working principle, it is mainly divided into hysteresis dynamometer, magnetic particle dynamometer, electric turbine dynamometer, and electric dynamometer.
Application of energy feedback device in centrifuge
In the electric drive of chemical enterprises, the application of variable frequency drive of centrifuge is very common.
Application of IPC frequency conversion feedback electric control system in mine winch 380V/660V
This paper mainly describes the application of the IPC variable frequency energy feedback system which used in well winch. This system adopts PH7 series special inverter for hoisting industry and PFH series heavy-duty energy feedback equipment, and reconstruts the original rotor series resistance speed control mode, which can feed the regenerate energy of the hoisting motor back to the grid.
Application of feedback unit PGC on CNC machine tools
Computer numerical control machine tools is an automated machine tool equipped with a program control system.
Previous page
1
Next page
3rd Floor, Building 2A, Meibaohe Industrial Park, No.14 Shilongzai Road, Dalang Community, Longhua New District, Shenzhen
86-755-83409720 86-755-82839926
86-755-82839967
Follow IPC
Copyright 2021. Shenzhen IPC Technology Co., Ltd. All rights reserved. Power by:300.cn Shenzhen 粤ICP备13061212号 SEOnavigation